Sonometer 40

Features
• Available in nominal flow rates qp 0.6, 1.5, 2.5, 3.5, 6.0, 10.0, 15.0, 25.0, 40.0 and 60 m3/h
• Triple communication with M-Bus, wMBus onboard + 1 additional communication module slot
• Housings with thread (G3/4 to G2) or flange (DN 20 to DN 100) connections
• MID approval for ultrasonic energy meter with dynamic range of 1:100 (qi:qp) in class 2
• Optional MID approved dynamic range of 1:250 in class 2
• Temperature range 0 - 180 °C
• Nominal pressure PN25 bar as standard
• Calculator with IP65 protection class as standard (IP68 on special request)
• Flow sensor with IP68 protection class as standard
• Return or supply pipe installation, for vertical or horizontal mounting
• Battery lifetime for at least 15+1 years
• Low pressure loss, insensitive to dirt
• No calming sections needed before or after the flow sensor (DN 15-DN 50)
• For DN 65 to DN 100 calming sections are needed (5 x DN on inlet and 3 × DN on outlet of flow sensor)
• Remote reading via M-Bus, radio OMS 868 MHz, RS 485 Modbus, BACnet, LoRA-WAN, pulse output or optical interface
• Two pulse inputs or outputs (always included, optionally with pre installed cable)